Description
Replacement Jazz Bass Bass neck finished.
20 medium jumbo frets.
38.5mm width at nut slot.
17.5mm diameter tuning machine holes.
240mm / 9.5″ fingerboard radius.
Clear high gloss Polyester finish.
Trussrod adjustment at heel end of neck.
One piece Maple with skunk stripe on the back of the neck.
Neck mounting holes are not drilled.
Please note that this Jazz Bass bass neck comes completely fretted but without any nut fitted – this needs to be ordered separately – .
All necks require a final level, crown, and polish and may need to be fine-tuned to your instrument and playing preferences. Your new neck should be carefully inspected prior to installation and/or modification as necks are rendered non-returnable once altered. Due to the organic nature of wood each neck is considered unique and may have minor variations in grain or finish from those pictured. Armstrong Music does not sell what is commonly referred to as seconds or blems. Hosco neck heels are made to Fender USA dimensions and tolerance, this may not account for neck pocket shrinkage or expansion over time. Some neck pocket modification may be required.
Armstrong Music recommends that if you are not familiar with replacement neck installation that you contact a qualified luthier or repair shop.
Important Information –
Width of neck at nut slot – 38.5mm
Width of neck at heel (where it joins the body) – 63.5mm
Depth of neck at heel , – 26mm
Diameter of tuning holes – 17.5mm.
Reviews
There are no reviews yet.